CF-38 3D Trigger Edge Finder is used to find edge finders in machining centers

The product adopts a variety of waterproof and dustproof designs, which is more reliable to use. Key components are gold-plated to extend the service life. Equipped with steel probe and probe tip.

Repeat positioning accuracy: ≥0.00five; trigger life: ≤3 million times.

The 3D trigger edge finder is a high- for precision, multi-functional measuring instrument with a very compact structure and extremely convenient operation. It is small in size and can meet the equipment needs of more customers.

It is widely used in CNC machining centers, engraving machines, lathes, milling machines, etc.

Specifications:

Part name: Trigger 3D edge finder

Product model: CF-38

Material: stainless steel

Color: black, red

Size: 11.3 x 10.21 x 7.19 cm

Probe direction: ±X±Y+Z

Probe safety travel: ±20° in X and Y planes, +2.5mm in Z direction

Trigger life: *3 million times

Insulating materials can be measured

Precautions:

1. Do you need to turn on the spindle speed?

Absolutely.

Don't laugh, there are such users.

2. How to distinguish the three wires?

The red wire is VcC, the black wire is GND, and the yellow wire is lO

3 is the concentricity different every time the probe is installed?

Because your ER chuck spring clamp cannot guarantee 100% uprightness, every time the probe is installed, even if the concentricity is I3athere, there will still be deviations, so it is to AAA or higher for precision chucks (concentricity <= 0.00five), because many domestic chucks are fake standards. It is recommended to use a high- for precision gauge or steel rod to check the concentricity against the workbench after the chuck is installed. It is best to place the dial indicator 50mm away from the chuck, which is roughly the distance from the ball head of our probe to the root of the tool handle.

4. is the concentricity still poor even though it is an AAA chuck? That's because you bought a fake standard chuck.

Under normal circumstances, the spindle runout is 0.01. The error between the milling cutter held by the AAA chuck and the workbench tool holder does not exceed 0.02, and the error does not exceed 0.03 at most. There will be a slight angle deviation between the spindle center axis. The distance between the spring chuck and the spindle center axis depends on the length of your tool holder. Generally, you use a milling cutter scale, and the stylus of your probe cannot see about 2TTOT, and the error will be further amplified. J0mMAW3'nornTono.nuine high- for precision chuck is nothing more than a price difference of tens of dollars.

Package Contents:

A: 1*Edge Finder + 1*Probe + 1*2M Line (Black, Red Optional)

B: 1*Needle Holder

C: 1*Probe

D: 1*2M Line

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.