Search
S$3.38
S$6.14Save up to 45%
Buy 2, save 5%
ESP-12E ESP8266 Serial WIFI Remote Wireless Control WIFI Module
Sold by XBD Electronics
Select options
Select
Shipping
From S$1.49
Est. delivery by May 24 - May 28
XBD Electronics
765 items
Product description
ESP-12E ESP8266 Serial WIFI Remote Wireless Control WIFI Module
SOC characteristics:
●Built-in TensilicaL106 ultra-low power 32-bit microprocessor, main frequency support 80MHz and 160MHz, support RTOS
●Built-in TCP/IP protocol stack
●Built-in 1 channel 10 bit high precision ADC
●Peripheral interface HSPI,-UART, 12C, l2S, IR Remote Control, PWM,
GPIO
●Deep sleep hold current is 10uA, shutdown current is less than 5uA
●Wake up, connect and deliver data packets within 2ms
●Power consumption in standby mode is less than 1.0mW (DTIM3)
Wi-Fi features:
● Support 802.11 b/g/n/e/i
●Support Station, SoftAP, SoftAP+STA mode
●Support Wi-Fi Direct(P2P)
●Support CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration
●P2P discovery, P2P GO mode/GC mode and P2P power management
●WPA/PA2 PSK and WPS
●802.11 i security features: pre-certification and TSN
●Support 802.11n (2.4 GHz)
●802.1h/RFC1042 frame encapsulation
●Seamless roaming support
●Support AT remote upgrade and cloud OTA upgrade
●Support Smart Config function (including Android and iOS devices)
ESP-12E
Model:ESP8266-12
ISM 2.4GHz
PA +25dBm
802.11b/g/n
Warnings:
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
3.You must use a logic level converter, or a 3.3V FOR Arduino
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this
module.
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
Explore more from XBD Electronics
5
6sold
S$23.77
S$24.26
No more products
Open TikTok