[SG READY STOCK]99800Mah Car PowerBank Jump Starter Car Emergency jumper power bank with pump jumper kereta Accessories Cable

One year free insurance service

If you have any questions, please contact us. Thank you

NOTICE :

**VOLTAGE UNABLE TO BE CHANGE TO 16V/19V , JUST CAN 12V ONLY !!!

**UNABLE TO JUMPSTART LORRY/VAN

**ONLY CAN JUMPSTART SEDAN CAR

**NO SUGGEST TO CHARGE HANDPHONE , BECUASE THIS IS CAR POWER BANK

Operate method:

1. Before start the car, please make sure the host minimum 2pcs LED indicated light on, then connect the blue plug fully seated into the host socket, and confirm the cable indicator is off

2. Connect the red clip to the positive (+) battery terminal, black clip to the negative (-) battery terminal

3. Start the vehicle

4. When the vehicles starts, please make sure pull up the clamp cable from power bank and then from the car battery terminals. please do not connect the red and black clip to the vehicle battery terminals within 30 second.

Emergency start step:

1. Red clamp connect "+", black clamp connect "-"

2. The plug connect the jump starter

3. Start the vehicle

4. Remove the plug from the jump starter

5. Remove the clamps from the battery

Cautions:

1:Take off the main unit within 30 seconds after starting the car.

2:Don't clip the two terminals at the same end on the battery.

3:Press the switch five seconds to start If you want to use LED for illumination and select the status (light, strobe,SOS,close) by pressing the switch to transform.