Mechanical Hygrostat Humidity Controller for Cabinet MFR012 Easy to Use

The electromechanical hygrostat MRF012 is designed to control enclosure heaters , so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion is effectively prevented.

Specifications:

Switch difference:4% RH (±3% tolerance)

Permissible velocity:15m/sec

Contact type:change-over contact

Contact resistance: 100 000 cycles

Min. switching capacity: 20V AC/for DC 100 mA

Max. switching capacity: 250 VAC, 5 (1) A for DC 20W

EMC: acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3

Connection:3-pole terminal for 2.5mm⊃2;, clamping torque 0.5Nm max.: rigid wire 2.5mm⊃2;,stranded wire (with wire end ferrule) 1.5mm⊃2;

Mounting: clip for 35mm DIN rail, EN50022

Casing: plastic according to UL94 V-0, light grey

Dimensions: 67 x 50 x 38mm

Fitting position: variable

Operarting/Storage temperature: 0 to +60°C (+32 to +140°F) / -20 to +80°C (-4 to +176°F)

for Protection type: IP20

Note:

Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

Please allow 1-3mm slight deviation due to manual measurement. Thank you!

Package include:

1pc Humidity Controller