Primer Anti-Corrosion Conversion Water-Based Metallic Paint Primer Conversion Agent Antirust Refurbished Coating Rust Remover

Brush size: 10 * 1.5cm

Rust remover size: 5.7 * 6.2cm

Ingredients: licorice extract, tea extract, mint oil, tea oil, plant amino acids

Net content: 100g

Description:

Reconstruction of existing corrosion:

The chassis rust converter uses black protective polymer barrier to transform and replace the existing rust.

Protect iron and metal surfaces:

It can repair and protect the iron and metal surfaces of cars, garbage cans, equipment, railings, etc.

Prevent future corrosion:

This anti rust treatment prevents future corrosion by preventing moisture in rain and snow. Dry after 20 minutes.

Non toxic smokeless formula:

It is a non flammable, low VOC water-based treatment agent. It is non-toxic and does not emit harmful smoke.

Direction:

1. Surface treatment: remove large rust and oxide scale particles with steel wire brush or sandpaper. Thoroughly clean the surface to remove dirt, dust and grease.

2. Usage: shake well or stir well before use. Apply two coats with a brush, roller or pump spray, and the drying time between the two coats shall be at least 20 minutes. It takes 48 hours to cure before applying high-quality paint.

3. Cleaning: the application equipment should be cleaned immediately with soap and water.

4. Overview: do not use this product if the surface temperature is lower than 50 ° F. Store in a cool and dry place to prevent freezing or temperatures above 100 ° F. In order to protect the iron surface for a long time, two layers of high-quality oil-based paint should be used to seal and cure the antirust agent coating. No other primer is required.

The package includes:

1 * rust remover