COD Ready Stock MD80 Mini Camera Mini Vedio Audio Camcorder Sports Camera Motorcycle Helmet Police Body Action Cam Hidden Video Camera DV DVR Vedio Audio Camera For Bicycle Outdoor PHD1080

This machine has a built-in rechargeable lithium battery. When using this machine for the first time, please charge it first. The MINI DV can be charged in the following ways:

(1) Connect to the computer to charge, use the USB data cable to connect to the computer, and then charge.

(2) Use the charger to charge, connect the charger with a USB data cable, and then charge.

When charging, the green light and the red light are equally bright, both in a stationary state.

Note: When the battery power is low, it will directly enter the protection state and cannot be turned on. In this case, please charge the unit.

Power on and record

1. Press the Power button lightly, the green indicator light is on, the machine is in the power-on ready state, and immediately switches to the standby state.

2. Press the Record/Stop button on the top lightly, the green light is always on, the red light starts to flash slowly, the camera starts to record, the resolution of the recorded file is: 720X480, and the frame rate is 30fps/S.

3. Short press the Record/Stop button again to stop recording and automatically save the file. After saving, the red light will remain on. To continue recording, please tap the Record/Stop button again.

Notice:

1. Be sure to confirm that a T-flash (MicroSD) card has been inserted.

2. If no card is inserted, it will automatically shut down after 30 seconds.

3. The maximum capacity of T-flash (MicroSD) is 16GB.

4. It takes a certain amount of time to save the file.

5. Do not press the operation key continuously while saving.

Voice-activated camera:

Flashes quickly (indicates voice-activated standby). When the sound of the recording site exceeds 60 decibels, the D001 starts to record automatically. At this time, the blue light is always on and the red light is flashing slowly (indicating that the voice-activated video is in progress). After each voice-activated recording starts, the minimum time for each recording is 2 minutes. If there is no sound at the recording site after 2 minutes of recording, the recording file will be automatically saved and turned to standby state; After that, there is still sound in the scene, and it will continue to be recorded for a period of time.

Shutdown:

In the camera state or standby state, press and hold the Power button for 3 seconds, release the button, and wait until the indicator light turns off, indicating that the machine has been turned off.

Reset:

When the machine does not work properly due to illegal operation or other unknown reasons, it is necessary to reset the product