Practical Casting Instrument Laser Level Meter Measure Tool Protractor Angle Ruler Digital Inclinometer Gauge Construction Tools

Product size: 120*20*35mm

Net weight: 95g

Laser wavelength: 660nm

Protection level: IP54

Q&A

1. Does laser cause harm to human body?

The laser source used by LI is Class II laser, with the power consumption less than 1MW, and daily use will not cause any harm to human body. In case of accidental laser irradiation, eyelid reflection will usually provide sufficient protection. Do not maliciously irradiate the laser on others.

2. What is the LI laser projection angle instrument used for?

LI provides accurate horizontal and vertical foundations and plumb benchmarks for indoor construction setting out and calibration, and plays the role of auxiliary and positioning marking. It is mainly used for the flatness and straightness of the ground, the horizontal and vertical positions of equipment installation, etc. When installing hanging pictures, cabinets and furniture, with the help of LI, you can ensure the horizontal and vertical straightness and consistency of height. You can also check the slope of the toilet and kitchen floor drain locations to prevent water accumulation in the later period.

3. What environment is the LI laser projection angle instrument suitable for?

The LI laser line projection level can meet various measurement requirements for daily home and home decoration construction, and can also be used for outdoor auxiliary operations. It is small, portable, easy to operate, and supports 360 ° arbitrary angle line projection. The laser line projection is thin and bright, intelligent and accurate pancake, which is an invaluable practical measurement tool.

4. Which scenarios are LI specifically applied to?

1. Auxiliary installation of paintings, artworks and photos on the wall.

2. Door and window frame installation.

3. Stick wallpaper and wall tiles.

4. Install wires and pipes.

5. Install wall cable, power socket, switch and lighting lamp.

6. Install the suspended ceiling and ceiling.

7. Painting creation.

8. Install furniture counters.

9. Assist in laying floor tiles.

10. Check the gradient of the floor drain in the kitchen and toilet.

5. What is the furthest range of the LI laser?

Under general indoor conditions, the projection range can reach about 10m; In the outdoor strong light and dusty environment, the reflection of the projection surface is weak, and the projection range will be correspondingly smaller.

6. How should the product be used correctly?

During horizontal measurement, the instrument shall be placed stably to avoid shaking on the feel as much as possible. Press the key to measure after it is stable, and the data can be read only after it is stable. When using this instrument, it is recommended to use it together with the LI special bracket, so that the application scenario is wider and the measurement is more accurate and convenient.

7. How to use the fixed support together?

The size of the LI bracket fixing port is 6.35mm, which is compatible with most brackets, such as ordinary camera tripod PTZ. The LI can be installed on the support and used to realize 360 ° fixed measurement at any angle. It is often used for complex engineering environment measurement such as stair oblique line project, ceiling, narrow space corner, etc.

Packing:

1pc Laser Level or mount stand

Notice:

1.Please allow 1-2cm length error due to manual measurement.