AC220V Electronic Timed 2 way Air Compressor Gas Tank Automatic Drain Valve

Brand new and high quality

Made of high-quality materials and

material: metal

Input/output port size: 1/2"

Circulation aperture: 5mm

Indicator light: LED indicates power on/off

Voltage range: ±10%

Protection level: IP65

Insulation: Class H

Maximum working pressure: 1.6Mpa

Maximum temperature: 90°C

Ambient temperature: -40°C to 60°C

Maximum current consumption: 4mA

Power supply voltage: 24-240V AC/DC 50/60Hz

Discharge time (ON): 0.5--10 seconds

Time interval (off): 0.5--45 minutes

Application: Widely used in compressed air components such as filters, separators, dryers, gas tanks, drip legs, etc.

Install:

1. Clean the compressed air before installation.

2. Pay attention to the direction of the arrow when installing the valve: do not use hoses that are not resistant to air at the outlet.

3. The power supply voltage should be consistent with the drain valve voltage: when using DC power, the positive pole must be connected to connector "1".

4. The drain valve has been connected with cables before leaving the factory. Brown is the live wire L, blue is the neutral wire N, and yellow-green is the safety ground wire GND.

5. Be sure to tighten the long screws on the junction box to prevent water damage.

warn! When installing an electronic drain valve, make sure:

1. The compressed air is exhausted (i.e. for zero pressure).

2. The power is turned off.

Package Included:

1 x electronic drain valve

Note:

1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.