About this product
- Warranty Type:No Warranty
Product description
Color: black, white, forsilver, red, blue, forgold, gray, pearlwhite
1. Shake the product thoroughly to mix the paint evenly;
2. Rotate the pen head counterclockwise, and apply the paint evenly to the repaired area with the built-in brush;
3. After use, please tighten the pen head to prevent drying and volatilization.
The scratches are about 90% effective, please follow the steps correctly.
1 Shake the product up and down for 10 seconds before use, and the pen head should face up when unscrewing, otherwise it may overflow.
2 Apply the color of the car body on the attached operation, and then decide whether to apply the scratches.
3 Scrub the scratches clean, and polish the rusty and uneven areas.
4 Use tape to cover the non-scratched areas to avoid scratches, soak the sandpaper in water for half a soak, and then polish it with little force until it is smooth. (If there is no protrusion, unevenness or rust, you can ignore this step)
5 When applying, do not apply back and forth. The order can be from left to right and from top to bottom. Apply only once. If it cannot be covered, you can wait for half an hour for it to solidify and apply again. Generally, 3 to 5 layers can completely cover it. Apply more times for deeper scratches.