Pipe Welding Machine 1000W Pipeline Welding Iron Plastic Welding PB/PP/PP/PPR Pipe Heating Heat Melt Tool 63type Abrasive

1. Install the radiator on the fixed welding equipment, put the welding equipment on the shelf, install the corresponding heating mold according to the required pipeline specifications, and then tighten it with a wrench. Usually the front end of the back end is small.

2. Power: turn on the power supply (please note that the power supply must use the ground protection line), the green indicator light, until the green light goes out, and the red light is turned on, indicating that the fuse is incorporated into the automatic temperature control state, and you can start operation. Note: In the automatic temperature control state, the red light and the green light will be lit alternately, indicating that the fuse is in the control state and will not affect the operation.

3. Welding tube: Pipe cutting machine, directly cut off the pipeline. At the same time, pipelines and pipelines, without rotating into the fuse mold, and according to the requirements of the table, directly heating the time and the pipes at the same time from the dice after the pipeline. Do not rotate directly to the uniform depth you need.

4. Slide the handle and grab it comfortably. Thickening steel plates, quickly transmit.

5. The thick gold paint touches the head, and the thermal melting is quickly heated. Suitable for pipeline construction equipment.

Specification:

Product name: pipe welding machine kit

Type: 1000W

Material: metal

Color: yellow

Plug: EU plug

Heating speed: 1 minute

Suitable: PPR / PB / PE pipeline

Relators: 45 % to 95 %

Heating temperature: 0 ~ 320 ℃ / 32 ~ 608 ℉

Environmental temperature: -20 ~ 50 ℃ / -4 ~ 122 ℉

Temporary control: Digital temperature control

Packing list:

63 1000W:

1 X pipe welding machine

6 X welding head (20mm 25mm 32mm 40mm 50mm 63mm)

4 x screw

1 span