About this product
- Support Voltage(V):110/220
- Number of Chargers:1
- Fast Charging:Yes
- Warranty Type:Supplier Warranty
Product description
1. Introduction to solar energy systems:
solar panel (to receive solar energy to charge the battery)+Inverter (to convert 12V DC power of the battery into 220V or 110V AC power)+solar controller (to control battery charging and discharging)+battery (energy storage) (provided by the customer.
This is a modified sine wave inverter,NOT applicable for devices which work by built-in motor, hair dryers,air conditioners, coffee machine,water pump, induction cooker,refrigerators and microwave ovens etc.Make sure that the total rated power of the connected devices is ≤ 300W.
600W 18V Single Crystal Solar Panel Dual USB 12V/5V DC Single Crystal Flexible Solar Charger, Suitable For Car RV Battery Charg
1. Configure 12V DC5.5x2.1 and 5V USB output interfaces.
2. Dedicated to charging 12V batteries and 5V devices.
3. Front panel EVA+PET, with good flexibility, light weight, and durability.
4. The efficiency of single crystal solar cells can reach up to 21%.
5.4x holes and 2 free shackles make installation more convenient.
6. IP65 waterproof, suitable for outdoor use in light rain weather.
We use sponge pads and corner protectors for packaging.
Power under normal conditions:20-80w
Maximum USB output: 5V 2400mA/1500mA
Panel size: 540x280x2.5mm
It can be used as an alternative charger for cars, trucks, caravans, ships, motorcycles, RV batteries, or any 12V lead-acid battery.
2. It is also suitable for emergency lights, advertising lights, traffic lights, electric fans, Solar-powered pump, and is equipped with DC or USB interfaces.
Regarding the controller:
1. It has a controller that provides excellent battery protection.
2. The controller is 12V and 24V adaptive.
Usually, a 10A controller is sufficient, as Ipmax is approximately 2.3A. If you want to use the controller in other high-power solar systems, you can also choose 20A or 30A.
1x 12V crocodile clamp power cable
1x 12V lighter plug power cable
Independent packaging:solar panel+ inverter+solar controller
Packaging and accessories:
1 inverter+1 pair of red and black battery clips+1 lighter+English inverter manual+1 solar controller+English controller manual+solar panel+DC cable+DC crocodile clip
1. Please try to use our standard battery cable as much as possible, otherwise it cannot output full power!
2. Start the inverter; Start the machine first and then turn on the load. Shutdown: First disconnect the load and then shut down.
3. It is strictly prohibited to connect the mains power to the output port, and it is strictly prohibited to reverse connect the battery with the load.
4. Do not overload household appliances such as inverters, motors, water pumps, air conditioners, and other inductive loads. Please multiply the rated power by at least three times, and the resulting value should not exceed the inverter power
5. The inverter red light is on and there is a buzzing sound. Please check if it is overloaded and if the battery is fully charged (regardless of whether your battery is a new one). Please charge the battery for at least 3 hours and try again
6. When not using the inverter, please turn off the inverter switch
When the inverter beeps, be sure to first disconnect the load, turn off the inverter switch, and then check the problem
What Size Power Inverter Do I Need?The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you'll need (at least 10% to 20% more than your largest load).
1. Due to slight color changes caused by manual measurement and different display settings, please allow for a difference of 1-3 centimeters (0.4-1.18 inches).
2. Due to differences in lighting and screen, the color of the item may differ slightly from the image. Please understand.