0.5 x 40M PVA Wood Grain Hydrographic Film-Water Transfer Printing-Decorative sticker DIY car modification

Place of Origin：Guangdong, China

Material Type: Film

Product Name：Water Transfer Printing Film

Feature：Water Soluble

Usage：WATER TRANSFER

Size：50cm/100cm (W)

Color：Forged Carbon

MOQ：20-40M

Thickness：35-40u

Samples Freely

storage temperature is 25°C; humidity is 55%

Thickness：0.03mm

feature water transfer ,water solution;hydrographics

At present application： water transfer printing materials include: Plastic (ABS, PP, PC, PU, PS, PVC, TPU, PE, TPR, Eva, nylon, etc.) , metal, glass, ceramics, fiber, wood, etc. , and in the automobile, motorcycle, electronics, daily necessities, crafts, home supplies, hardware building materials, shoes and other supplies have been promoted.

1. Primer: decontamination, degreasing, rust removal, impurity removal or flame treatment according to the material of the workpiece to be transferred;

2. Drying: choose the appropriate temperature to dry the primer according to the nature of the primer;

3. Film selection: select the pre-transfer pattern or customize it according to the solution provided by the customer;

4. Set the film: cut the film paper of the same size as the workpiece to be transferred, and lay it flat on the water surface (the printing side is facing down);

5. Activation: When the film paper sits on the water surface for 60-90 seconds

6. Transfer printing: about 5-10 seconds after spraying the activator, keep the belt transfer workpiece at a 35-degree angle to align the film

7. Soak: soak the transfer workpiece for about 30 seconds, so that the ink can be more stably attached to the workpiece

8. Rinse: Note that the water pressure should not be too large, otherwise it will easily cause damage to the transferred graphics.

9. Drying: about 50 to 60 °C.

10. Topcoat treatment Dry the object after apply the top coat.

Final Product