Product description
Installation Instructions:
Step 1: Clean the target surface of the window, make sure no stain is left.
Step 2: Measure the width and the height of the target area, cut the film and leave an extra 2-3 cm on each side for easier adjustment.
Step 3: Peel off the transparent film.
Step 4: Spray A LOT OF soapy water onto both the window surface and the backside of the static film.
Step 5: Paste the wet side of the film onto the wet glass, smooth the film with hands.
Step 6: Use the squeegee to remove extra water and bubbles from the center to the around with proper strength.
Step 7: Trim off the margins.
Step 8: Wipe out surface water with a lint-free towel.
Useful Tips for Installation:
1. Before pasting, remember to tear off the protective film.
2. Cut the film to a size of 2-3 cm from the window frame to avoid falling or curling.
3. Spray enough water onto the window and the backside of the film during the installation progress, the more, the better.
4. If you want to remove it, simply peel the window film from any corner. It comes off cleanly without residue.
5.The window film only works on smooth, clean and flat glass doors and windows.