For 3018Pro/ CNC Grbl Z Probe CNC Z-A xis Router Touch Plate Tool Setting Probe

Product Description: brand new high quality Made of high quality material, For 3018Pro/ CNC Grbl Z Probe CNC Z A xis Router Touch Pad Tool Set Probe how to use: 1. The for Alligator clip is fixed on the tool 2. The port has been connected to the control board (the A5 port on the 3018pro control board) 3. Place under the tool (plastic + aluminum plate) 【Z-probe】CNC Router Tool Setting Automatic tool setting instrument. Thick ness: 1.6mm (±0.03mm) 【Tool setting function】 It can accurately locate the working , which is most suitable for PCB engraving. 【Probe 】Please change the Probe in Grbl to: G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10 What does G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10 mean: G91: use relative coordinate mode G21: use mm unit G38.2: Tool setting Z-30: Move 30mm in the negative direction of the Z a xis, stop when it touches the tool setter, and use this as the F100: Z- running speed  ;: newline, next instruction G92: Coordinate offset, because the tool setting instrument has thick ness, in order to remove the thick ness of the tool setting instrument, it is necessary to set the offset Z1.6: Z- offset 1.6, 1.6 is the thick ness of the tool setting instrument, the thick ness measured by the tool setting instrument shall prevail ; : newline, next instruction G0: fast movement Z5: The Z moves to the position of coordinate 5, which is convenient to take out the tool setting instrument F10: Z- upward movement speed Package Included: 1 * CNC Z router touchpad tool Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data.