RISC-V Milk-V Duo Development Board+2MP CAM GC2083+STC Downloader CV1800B Support Linux for IoT Enthusiasts DIY Gamers

processor: 1GHz and 70OMHZ RISC-V C906 processor.Integrate CVITEK TPU to realize intelligent detection.Support H.264/H.265 video encoding, up to 2880x1620@20fps.Compatible with HD CMOS sensors.Programmable frequency output for sensor clock. Comprehensive ISP features for image optimization.Some OpenCV libraries support CV hardware acceleration.16-bit audio codec with built-in microphone input and output.Flexible network configuration with 1 Ethernet PHY

Product parameters: Processor: CVITEK CV1800B (906@1GHz; 906@700MHz); Memory: DDR2 64MB; Storage: 1 Mirco-SD slot, 1 SD NAND pad; USB: 1 Type-C for data and power, 1 USB2 pad; Camera: 1 16P FPC socket (MIPI CSI 2 channels); GPIO: 26 pins available for general purpose I/O (GPIO)

GPIOs: Up to 26 GPIO pins on the MilkV Duo 40-pin header to access internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART.Up to 3xI2C / 5xUART / 1xSDIO1 / 1xSPI / 2xADC / 7xPWM / 1xRUN / 1xJTAG

USB interface: Compatible with USB 2.0, backward compatible with USB 1.1.Support for various speed modes, host/device capabilities and transports.note: Please note that due to different batches, there may be differences in the appearance, color, and printing of the product, which will not affect its use

CSI-2 (MIPI Serial Camera):

With 16-pin FPC interface for 2-wire MIPI camera input

Operate l2C, CLK and RST signals at 1.8V voltage level

Ethernet:

Milk-V Duo includes CV1800B chip and 100Mbps physical layer

PHY connected to 5-pin pad

Ethernet use requires external transformer and RJ45 socket

CSI-2 (MIPl Serial Camera):

With 16-pin FPC interface for 2-wire MIPI camera input

Operate l2C, CLK and RST signals at 1.8V voltage level

protocol:

Scalable interface via USB hub (up to 127 devices)

Power saving mode, support HID devices

USB with configurable software

USB Type-C for accessing storage media

Micro-SD:

SDIO 0 is compatible with the Secure Digital Storage (SD3.0) protocol

Board Specifications:

Single-sided PCB

Type-C port located on the top edge

Dual Slotted/Through Hole Headers Around Remaining Edge

Available as surface mount modules or in dual in-line package (DIP) format

40 primary user pins on 2.54mm (0.1IN) pitch grid with 1mm holes

Compatible with FOR veroboard and breadboard

Development Board size: 21mm x 51mm

Material: PCB

colour: random color

Package Contents:

1 x Development Board(randomly colored. Cannot be chosen the specific color.)

1 x 2MP CAM GC2083

1 x STC Downloader Cable(CH340G USB to serial UART TTL)

Only the above package content, other products are not included.