Heavy Duty SUS 304 Stainless Steel Bath Towel Bar in 24", Space-Saving Single Towel Rod

 

2. SPACE SAVING of 9-inch HAND TOWEL BARS BUT REALLY DRIES: Are you looking for a small towel rack to hang on a narrow wall? The 9-in hand towel rod is a perfect design on space-saving. It can allow hand towels or dish towels to dry completely without bunching up or touching but also not take up a ton of space in your Powder Room, Kitchen Room, Cabinet Door etc. 9 inch stainless steel towel bar hanger is just the perfect size for the limited room.

 

3. IT IS SIMPLE, CLASSY, SLEEK AND SAFE: This single bath towel bars won't go out of style because of modern design. All the mounting screws are concealed that the bars were never loose and falling off the wall, and delicate edges protect your body from scratching. The polished chrome stainless steel finish is super classy, it doesn't display any spots and resist daily scratches, daily maintenance is simple, keeps its smooth and flawless appearance easily.

 

4. VERY EASY TO INSTALL: Buy a 9-in towel bar. Installation was insanely easy with well made hardware. Everything you need comes with the package except the tools! So all you need is something to measure with, a level, a pencil, a screwdriver, a small rubber hammer to hit in the wall anchors, and a cheapest drill. (Make sure you buy the drill bit size 7/32" if you will be using wall anchors instead of drilling into studs. If you're drilling into studs, you will need 1/8" bit.)

 

5. OVERALL DIMENSION OF THIS 9" TOWEL BAR: Distance between screw holes on the 9 inch model is 25/32". From center to center of the mounting brackets is 6 3/4". The overall dimension of this fixture is 9 1/16". You will get 6 11/16" of hanging space. The mounting plates are approximately 2" in diameter. 3 5/32" stick out from the wall. Bar diameter is 3/4", and 5/8" for support legs. Please kindly read more specific and measure your room space before ordering!

 

SPECIFICATIONS

Towel Bar Material: SUS 304 Stainless Steel

Finish: Chrome

Max Load: 11lb/5 KG

Total Length: 9 1/16"

Hanging Space: 6 11/16"

Installation Method: Screw Mounted

 

PACKAGE INCLUDE

Towel Bar * 1

Hex Key * 2

Allen wrench * 1

Solid Wall Mount Anchors * 4

Dry Wall Mount Anchors * 4

 

INSTALLATION STEPS

(1)Inspect hardware for any damage or loss.

(2)Prepare a pencil, a ruler, a rubber hammer, a screwdriver and a drill.

(3)Remove the hex keys and draw the right position for screw holes.

(4)Drill the holes properly with 6mm dill bit, put the anchors into the wall to fix hex keys.

(5)Put the mounting plate together with hex keys and tighten it slowly by wrench.