Product description
1x 15A INLET Black Without Wire (Including 4 Screws)
2x 15A INLET Black Without Wire (Including 8 Screws)
Product Name: 15 Amp Flanged Inlet
Product Material: ABS + Copper
Specifications: 125V 15A plug-in port
Standard: 5-15P for wire type
Quantity (Optional): 1Pc, 2Pcs/Set
Maximum wire size: 12AWG/3C Cable color: Black - Load (125 volts), White - Neutral, Green - Ground
Caution: For indoor and copper wire only. Electric shock and fire hazard. Never connect the socket to the power supply before installation. Failure to follow this instruction may result in electrical failure, fire and electric shock
Installation Instructions
1. Determine the mounting location on the hull. Be careful not to cross any wires, pipes or other obstacles when selecting the mounting hole location. All power tool must be well grounded.
2. Cut the mounting hole in the hull with a hole saw (2 inches in diameter).
3. Place the socket into the opening and adjust it so that the socket is aligned with the hull. Using the socket as a template, mark the mounting hole location on the socket with a pencil. Remove the socket and drill the hole using 1/8inch drill bit.
4. Remove the rear safety cover from the socket.
5. Pull the internal cable through the hull opening. CAUTION: Use 16AWG, 14AWG, or 12AWG wire. Never use smaller gauge wire as this may cause overheating and possible electrical fire.
#15 Amp Flanged Inlet #RV Shore Power Receptacle #Shore Power Supply Receptacle #RV Shore Power Inlet Plug #AC Port Plug #Generator Male Receptacle #Premium 15 Amp Flanged Inlet #Multipurpose RV Shore Power Receptacle #15 Amp Flanged Inlet for RV Camper #RV Shore Power Receptacle for Car Trailer
[15 Amp Flanged Inlet] NEMA 5-15P 15 amp 125V inlet plug can use 12AWG 14AWG 16AWG wires with clear color labels for easy wiring (black hot, green ground, white neutral), providing better safety
[With Waterproof Cover] This product has front and back cover to withstand bad weather, no worries about heavy rain, snow, blizzards, dust
[Premium Material] Our RV shore power receptacle is made of premium copper and ABS plastic, which can resist damage from chemicals, providing a more sustainable and long-lasting service life
[Easy to Install] It needs to drill a 2-inch hole, then put the inlet socket into the hole and fix it with screws (4 screws included), no gaps on the edges
[Scope of Application] It can be used as a generator or battery charger plug to power your electrical devices. It is widely used in RVs, campers, bumpers, cars, boats, ships, trailers, marine heaters, garden sheds, recessed socket boxes, etc