Electric Drill Compatible Riveting Tool Complete Set with Handle Wrench and Various Sized Heads for Easy Use

*Small size,  to carry, higher efficiency.

*The practicality of the aluminum body is three times that of plastic, and the service life is long.

*Lower noise during use, suitable for 2.4mm, 3.2mm, 4.0mm and 4.8mm rivet interfaces.

*A large number of riveting functions, with a good drawing effect, does not waste rivets.

*As long as you have a drill, you can complete drilling, rivet pulling and tightening. It is labor-saving, efficient, portable and not  to damage.

*It is used in  decoration, production of electrical appliances and air conditioners, riveting of aluminum alloys, etc., and automobile manufacturing and production.

Installation:

Step 1: Put the drill into the conversion chuck and the gear should not be too high.

Step 2: Rotate the drill clockwise and then clamp the chuck to the locking chuck. At this point, the drill rotates the riveter counterclockwise and emits a "falling" sound on the rivet.

Step 3: Insert the drill into the rivet needle in time to  for ensure the hole position is correct.

Step 4: Remove the drill counterclockwise from the rivet.

Specification:

*Product Name: Riveter Adaptor

*Material: Alloy Steel

*Color: Black

*Size: (Approx. ) 170mm / 6.69''

*Hex handle diameter: 8mm

*Wrench Length: 150mm / 5.9''

*Handle length: 120mm / 4.72''

*Usage: 2.4/3.2/4.0/4.8mm pulling blind rivets

*Suitable for: home decoration, production of electrical appliances and air conditioners, riveting of aluminum alloys, etc., and automobile manufacturing and production.

*Quantity: 7pcs/set

Package Content:

1 × Riveter Adapter

1 × Handle

1 × Wrench

4 × Rivet Head

Note:

1.Transition: 1cm=10mm=0.39inch.

2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.