DC 1-200A overload protection current relay current transformer induction switch

*DC sensing switch: Range 1-200A, contact capacity 0.5A@240V AC/DC, 10-30VDC SIGNAL TO PCL, give PLC signal NO POWER SUPPLY REQUIRED

*Thick shell, fire-proof and flame-retardant: The current induction switch has excellent comprehensive performae, excellent strength, fire-proof and high-temperature resistae, and stable working performae

*Perforated isolation induction type: When the perforated current reaches the set value, a switching signal is output (can drive a relay, a current contactor, or a switching signal to a PLC). When the current is lower than this value, it automatically resets, and so on.

*Adjustable threshold, high conductivity terminal block: large switch contact capacity, fast response, no mechanical noise, no opening and closing sparks, no limit on the number of repetitions

*Use scenarios: mechanical equipment supporting, automatic smart home, equipment linkage, assembly line control linkage, conveying and feeding control, PLC switch signal, etc.

Specification:

Part Name: DC sensor switch

Material: plastic shell

Color: blue

Size: 70*50*80mm

Contact form: NO,

Contact capacity: 0.5A@240Vac/dc

Maximum overload: +100%@200A

Sensing range: 1~200A (DC)

Startup time: within 0.1S

Shell material: ABS fireproof type

IP rating: IP30

Working temperature: -10℃~+50℃

Frequey range: 40-400Hz

Contact form: normally open/normally closed

Power supply: 10-30VDC/no power supply required

Current threshold: adjustable by potentiometer

Package Contents:

1*DC sensor switch

Note:

1. The perforated line can only be single-phase line

2. Select the corresponding range according to the current of the perforated wire.

3. This product is an electronic switch. Contacts for K1 and K2 cannot be directly measured with a multimeter. They can only be observed by connecting a load.