FX1N-20MR FX1N-14MT FX1N-20MT FX1N_24MT PLC Board Relay Delay Module DC10-28V

Made of high quality material, and practical to use

Output port is collector open circuit,rated current is 5A;and it can directly drive DC magnetic valve and do not need any external relays

Input high-speed pulse C235,C251 functions are compatible with FX1NY0 Y1 most trigger 10K pulse,its function is compatible with FX1N

Power Supply Voltage:DC 10-28VAppearance Size: 46*73*20mm(Approx.)Installation Hole Size: 38*22.5mm(Approx.)

Optional Style: FX1N-20MR, FX1N-14MT, JL1N-20MT, FX1N-24MT, FX1N_10MT

Common Functions:

1.Connect with the power,and the relay 1 will operate for N seconds then power off;relay 2 will operate for N seconds then power off

2.Connect with the power,and the relay 1 will operate for N seconds then power off;relay 2 will operate for N seconds then power off;and cycle in order

3.Connect with the power,and the relay 1 and relay 2 both do not operate;when there is signal or button for triggering,relay 1 will operate for N seconds then power off;and relay 2 will operate for N seconds then power off;above operations will be repeated until next trigger

4.Programming for signal 1 and signal 2,it can achieve random control to relay 1 and relay 2

5.When signal 1 has signal,relay 1 will operate,and relay 2 will power off;when signal 2 has signal,relay 1 will power off and relay 2 will operate

6.It can connect with PNP/NPN sensor signal,and programming on sensor signals can achieve random control to relay

7.When signal 1 has trigger,relay 1 is controlled;when signal 2 has trigger,relay 2 is controlled

8.Connect with the power,control motor will rotate positively for N seconds then rotate negatively for N seconds;then cycle in order

9.When signal 1 has signal,it can control motor positive rotating;when signal 2 has signal,it can control motor negative rotating

Relevant Chart:

Basic Sequential Control Instructions:LD,LDI,OUT,AND,ANI,OR,ORI,LDP,LDF,ANDP,ANDF,ORP,ORF,ORB,ANB,MPS,MRD,MPP,MC,MCR,INV,PLS,PLF,SET,RST,OUT,RST,NOP,END,CALL,CJ,FENDSRET,STL,RET

Data Process Instructions:ZRST,DECO,

High-Speed Process Instructions: for SPD,PLSY, for PWM,PLSR,HSCS,HSCR

Location Instructions:PLSV,DRVI,DRVA

Convenience Instructions:ALT,INCD

Contactor Comparison Instructions:LD+,LD>,LD<,LD<>,LD<=,LD>=,AND=,AND>,AND<,AND<>,AND<=,AND>=,OR=,OR>,OR<,OR<>.OR<=,OR>=

All instructions support 32 bit instructions and trigger instructions

Warm Tips:

1.When the computer use for GX Developer program software for programming,it needs to connect USB-TTL level conversion board with program port

2.This PLC is built-in 1 analog value input AD,and it corresponds with internal data register D5030(not D8030)

3.This PLC is built-in 1 analog value input DA,and it corresponds with internal data register D5101

4.It needs external connection of 232-TTL module when this PLC connects with touch screen or texts

Package Contents:

1*Module

Note:

1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.