433Mhz Remote Control Multi-function Wireless RF Copyable Rolling Code Fixed Code Learning Code Garage Door Gate Duplicator 433

1.: Chips can be copied 2260 (all manufacturers); 2262 (all manufacturers); PT2264, 5326 (all manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series, 527 (all manufacturers); 1527 (all manufacturers); 2240 (all manufacturers); HCS101, HCS200/HCS201 (some codes), HCS300/HCS301, some single chip microcomputers. ...

2: Code clearing method: Press the unlock button and the lock button at the same time (in some cases the up button and the down button), after the LED has blinked three times, release either button while the other remains pressed, then press the released button three times and the LED will go into a fast blink. At this point all memory data is cleared and the cleaned remote control will not have the LED light up no matter which button is pressed

3: Copy method hold the original remote control in one hand and the copied remote control in the other hand, the two remotes should be placed as close as possible (the ideal situation is to put the two remotes side by side on the table, zero distance), press the copy button respectively, when the LED indicator flashes three times and then blinks rapidly, it means this time the copy is successful, other buttons operate in the same way.

Some remote controls have low transmitting power and should be operated by putting the original remote control back on the copy remote control. For noisy places, you should avoid interference to operate, if the copy is unsuccessful, you should re-copy after clearing the code

Package includes: 1x remote control (with batteries)