10PCS 6mm Tube x /4\" /8\" NPT Male Swivel L Push to Connect Pneumatic Fitting

*Brand new and high quality

*Made of high quality material, strong and

*When using a hose, you should cut it as flat as possible and insert it into the bottom of the button, and then pull the air pipe out to for ensure a successful connection. When removing the hose, press the button as much as possible and at the same time pull the pipe out along the direction.

*When using, if the external thread is PT or NPT type, even if it is coated with sealant, please try to use raw material tape to prevent leakage.

*When working, the center line of the air pipe and the button should not exceed 30 degrees, otherwise, other models such as PL45 can be used.

*After tightening the threads, the coupling can be rotated to for align the pipe coupling.

*They are not swivel joints and should not be used for rotation.

Precautions for using connectors:

*. Make sure that the cut of the pipe is vertical, that there are no scars on the outer circumference of the pipe, and that the pipe is not oval.

*2. When inserting the pipe, be sure to insert it to the bottom of the joint. Failure to insert the pipe to the bottom may cause air leakage.

*3. After the pipe is connected and installed, pull the pipe to confirm that the pipe cannot be pulled out of the joint.

*4. Please do not use it for purposes other than fluid.

*5. Do not exceed the maximum working pressure when using.

*6. Do not use it outside the operating temperature range to prevent deformation of the sealing material, which may easily to leakage.

*7. Do not hit, bend, or stretch artificially to prevent damage.

*8. Do not use it in places where metal powder or sand dust is mixed. If debris adheres to it, it may cause malfunction or leakage.

*9.Precautions when disassembling: Use appropriate tools and use the outer hexagonal part of the pipe joint to disassemble the pipe joint. Remove the sealing material adhering to the mating side of the pipe joint. Otherwise, the adhered sealing material may enter the surrounding components and cause failure.

Specification:

*Name: Pneumatic joint

*Shape: L shape

*Color: black+blue

*Quantity: 10pcs

*Tube size: 6MM

*Thread size: /4"MNPT, /8"MNPT(optional)

*With thread sealant on threads

*Temperature resistance: normal temperature

*Pressure resistance: 0-8KG

*Seals: Buna rubber

*Use: compressed air

*Using pressure: 0-0.8mpa

*Operating temperature: 50℃

*Hoses used: PU tube, nylon tube

Package Included:

pneumatic connector

Notes:

. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.

2. Please allow a slight deviation between the data and the manual measurement.