High Voltage Electromagnetic Transmitter DIY Kit Coil Boost Module Circuit Board

1. Electromagnetic is a technology that uses electromagnetic force to accelerate the launch of objects. It uses electromagnetic pulses to accelerate the projectile to a high-speed state and then launch it at a very high speed.

2. The upgraded electromagnetic kit not only adds a charging circuit, but also adds a level indication circuit, which makes the electromagnetic charge faster, have a longer range, and launch faster.

3. The circuit has a level indicator, which is more convenient to observe the charging status.

4. The bottom battery box is beautiful and convenient in design, and the appearance is more beautiful. The battery can be easily replaced without opening the shell.

5. This kit is suitable for welding practice, electronic experiments and DIY enthusiasts.

Specifications:

Part name: Electromagnetic DIY kit

Material: abs

Color: as shown

Size: A board 85x78mm; B board 50x53mm

Working voltage: 3V

Power supply: 2 No. 5 batteries, DC 3V (self-provided batteries are required)

Accumulative current: 50-65mA

Emission current: 70-80mA

Instructions:1. Turn on the power switch ( for K1 boat switch), and the green LED light is on.

2. Wait for about 10-30 seconds, the blue light will turn on, and the charging power will accumulate about half.

3. Insert the projectile into the rear of the . Put down the launch button (round button K2), the shell flies out of the , and the launch is completed.The main technologies of the electromagnetic transmitter includePower system: Provide high-voltage power to generate strong electromagnetic force. Common power systems include capacitors or battery packs.

Electromagnetic accelerator: An electromagnetic device used to accelerate the launch of an object, consisting of a coil and a bracket. When power is supplied through the coil, a strong magnetic field is generated, which acts on the launch object to accelerate it.

Control system: Used to accurately control the launch process of the electromagnetic , including launching and monitoring the launch rate.

Package contents:

1 DIY kit (without shell/optional with shell)

Note:

When the electromagnetic transmitter is fully charged, the red light will turn on. Because the electromagnetic transmitter takes a long time to charge, the battery power gradually decreases, and the red light may not turn on. When the blue light turns on, it can be launched.

High voltage danger! Before installation or during use, if the capacitor needs to be welded, please discharge the capacitor first (use plastic wire with exposed copper wires at both ends, pinch the plastic part, and touch the two pins of the capacitor with copper wire. The copper must be discharged at both ends), otherwise it will cause the capacitor to short-circuit and cause danger.

Need to weld and assemble by yourself! Need to bring your own welding tools and detailed installation video tutorials!

***Safety Tips***

Do not shoot at people or fragile objects during use to avoid the risk of !