Product description
Size: Approx. 32 x 68 x 13mm/1.25 x 2.67 x 0.51 Inch
Batteries: 2 x CR2016 Lithium (Not Included)
For CAME gates or CAME Automatic garage. It is easily programmed from an existing unit or from the control board.
Copy Remote Control Manual
Please note that old remote controllers with no function at all cannot be matched, please confirm before placing an order.
1. Clear the code. Press and hold the two pushes on the remote controller at the same time until the indicator light blinks from slow to fast, which indicates that the code has been cleared. The indicator will continue to blink for a few seconds, please complete the second step below within this period of time.
2. Select the operation button. Press the button you want to copy. The indicator will go from a fast flash to a constant state. The indicator will stay on for about 10 seconds, so please complete the third step below to copy the remote control within this time. 3. Press the button you want to copy.
3. Press the key of the old remote control to be copied and get as close as possible to the copy remote control. The copy remote control will turn from normal light to slow blinking three times and then turn off, indicating successful pairing. For other buttons, please follow the above instructions.