Magnetic Spray Gun Kit with Wall Attachment

1. Core functions and design

Magnetic base: adopting a magnetic storage design, it can be fixed on the surface of ceramic tiles without drilling holes, easy to install and can be disassembled repeatedly. Some models support dual-mode water discharge (such as detergent/clean water switching) to meet different cleaning needs.

Spray gun material: The mainstream material is brass chrome plated, which combines durability and aesthetics; Some new models use spring tubes (with thick diameter and sufficient impact) or stainless steel hoses (with stronger water pressure but requiring fixed seats).

Adaptation scenarios: Mainly used for flushing stubborn stains on toilets, cleaning dirty water tanks on floor scrubbers, and also for deep cleaning of blind spots in bathrooms (such as the back and corners of toilets).

2. Installation and use

Non modified water pipe solution: By replacing one inlet and two outlet angle valves or installing three-way angle valves (horizontal/vertical types), the compatibility between the spray gun and the existing water pipe can be achieved, avoiding damage to the original water pipe.

Operation steps: Turn off the water source → Remove the old angle valve → Install the three-way/angle valve → Connect the spray gun → Test the water flow. Attention should be paid to the sealing of raw materials and pressure regulation of water pipes.

3. Precautions

Sealing: Before installation, it is necessary to ensure that the angle valve and water pipe interface are well sealed to avoid water leakage.