878D Soldering Station 700W Digital BGA Surface Mount Hot Air Welding Repair Tool For Solder Detachment Repair

Solder Power：60W Input voltage：110Vac/60Hz;230Vac/50Hz; Hot Air Power：600W Input voltage：110Vac/60Hz;230Vac/50Hz;

Solder Product Parameter

Solder Power：60W Output voltage：110Vac/60Hz;230Vac/50Hz; Solder Iron Temperature：180-500℃ The 110V heating core resistance value：About 55 Ω The 220V heating core resistance value：About 220 Ω Heating element：Plug ceramic heating core

Heat gun Product Parameter

• This product belongs to electrical products and should observe the safety matters to avoid accidents. • This specification points out the important matters for prevent accidents and the use of the product, Please read this instruction manual carefully and use the product safely. • After reading, please keep it properly for reference. Note: If the welding table can not heat up after replacing the heating core, the heating core can be reinserted! Check whether the installation is in place and whether the screws are tight; Temperature calibration is required in the following conditions: • The temperature needs to be recalibrated after replacing the heating core, otherwise the temperature will deviate. • The plug and pull heating core needs to correct the temperature regularly. In addition, the heating core model may be different and the temperature may be different The temperature needs to be corrected. • Adjust in the menu calibration temperature setting.

1pcs 878D Control Unit 1pcs Soldering Iron Handle 1pcs Hot Air Gun Handle