About this product
MaterialStainless steel pipe
Product description
Adjustable court mosquito net
Product list: It includes mosquito net bag, 30cm diameter splint, fixing screws, mosquito net pole and mosquito net ring
Installation method: Open the installation package, place the two clamping plates on the bed guardrail and fix them with one screw.
🛡️ Protective efficacy system
Test standards for technical parameters of indicators
Mesh density 50D dense braided (aperture 0.8±0.1mm) GB/T 4669
Mosquito repellent efficacy 100% block (Anopheles/Culex/Aedes) WHO CTD/OP/VEC/05
Transmittance adjustment 60%-85% adjustable (three-layer yarn superimposed) ASTM D1003
✅ Multi-dimensional protection :
Curtain overlap 28cm (protection Angle coverage ≥170°)
Bottom extension drag design (ground clearance ≤3mm)
Pollen filtration efficiency ≥95% (PM10 particulate matter)
🌬️ Climate-adaptive design
Four Seasons Functional Matrix
Verification of the core functional performance of the season
Spring pollen barrier (filtration area ≥2.8㎡) EN 149 FFP1
The summer air circulation rate is ≥35L/s·㎡ ISO 9237
The attenuation rate of autumn wind speed is 82% (5m/s simulated wind) GB/T 12704.1
Winter insulation performance ΔT=+3.5℃ (based on 23℃) ASTM F1868
✅ Environmental certification :
0 Chemical coating (via OEKO-TEX® STANDARD 100 Class I)
Material recyclability ≥92% (GRS 4.0 certified)
🎨 Style engineering parameters
Structural design system
❶ Load-bearing structure :
Lifting bracket: anodized aluminum alloy (wall thickness 1.2mm)
Maximum load capacity 15kg (ASTM F406 dynamic test)
The style frame structure is suitable for bed types
Court-style double-arch stainless steel frame European-style crib (L≤180cm)
Elliptical ring-shaped carbon fiber rod elliptical bed (circumference ≤600cm
Portable playbed with lace-patterned foldable fiberglass support frame
Washing fastness ≥ grade 4 (GB/T 3920)
Light fastness ≥ grade 5 (AATCC 16E)
① Usage limitations :
Do not hang items weighing more than 2kg (prevent bracket deformation)
LIFTING operation requires synchronization of both hands (anti-pinch design)
② Maintenance requirements :
Check the clamp screw preload monthly (attenuation ≤15%)
Hand wash in water below 60 ° C (Machine washing causes deformation of the mesh > 8%)