hometk New 180° Rotation Projection Alarm Clock Snooze Temperature Digital LED Clocks Home 12/24H Table Clock for Bedroom

2 Alarm clock & snooze: a set of alarm clock, press SNZ/LIGHT to enter snooze.

3 Temperature measurement range: -10~50℃ or (14-122F).

4 Brightness Adjustment Function: 3 levels of brightness can be adjusted.

5 Night mode (18:00-6:00), LED light will automatically dim at night.

6 Use USB plug-in, your own 3 AAA carbon batteries (synchronize memory time after power off, not as lighting function)

Body Color: Black Body

Shape: Rectangle

Size: 19.3*8.5*4cm

Powered :by AAA Battery (Not Included) or DC5V charge

Package Including:

1*clock, 1* USB power cable,1* manual.

Instructions for use and operation

1.Basic operation

(1). In any setting state, no key operation within 15 seconds, return to time mode.

(2). During setting, the setting item blinks.

(3). Short press + or - key, setting item "plus 1" or "minus 1", long press + or a, setting item accelerate increase or decrease.

(4). Driven by AAA battery, press any key, the display will light up with 30 seconds delay.

(5). In time state, press + key to switch LED brightness (three steps).

(6). In any state, press SNZ/LIGHT key, the projection displays the current time (or turn off the projection), press SNZ/LIGHT key when the alarm clock is ringing to enter the snooze state.

(7). When the projected time needs to be rotated 180 degrees, press SWAP to rotate or not rotate the projected display.

(8). Long press SNZ/LIGHT key in any state to turn off the screen display, then press any key to redisplay the screen. Anti night disturbance sleep.

2.Description

(1). The default display is January 1, 2023, and the year range is 2000-2099.

(2). When the alarm clock is ringing, the ringing duration of 1 minute is: BIBIBIBI ringing, no key operation within this minute will stop (end) ringing. And press SNZ/LIGHT to pause the alarm, start the snooze function, the AL logo will flash, wait until the set snooze time period will continue to alarm. Continue the above cycle of alarm process. Press other buttons MODE, ALARM, UP and DOWN to stop (end) the alarm. The default snooze time is 5 minutes. Only when the AL symbol is displayed, it means the alarm is on. And when the AL flag is not displayed, the alarm clock function is turned off.

(3). The temperature is measured and detected every 10 seconds, when the temperature is lower than -10℃, it shows -10℃, and higher than 50℃, it shows 50℃.

Tips:

1. The alarm clock turns off the screen after 30 seconds when only using battery power.If you want the clock always keep on,you need connet the power supply.And this clock shipping without batteries.