1. If you stick it on the surface of glass or tiles, because its material is relatively smooth, it is best to dry the veneer with a clean rag before sticking, which is easier to paste and has a better leveling effect;
2. For some larger pattern stickers, a little bubbles may appear after flattening. At this time, you can scrape with a scratch card to remove the bubbles or use a needle tip to puncture and smooth the small bubbles. It will not affect the overall paste effect. 3. If the pasted wall is damp, aging or just brushed with new paint, it may cause the wall sticker to automatically fall off after pasting, or it will cause the wall to peel off. You can use a hair dryer to dry the wall with hot air or wait for the paint to evaporate for a period of time before pasting, but the effect may vary, so please choose the pasted position carefully; 4. If you are not careful If you paste the wall sticker in the wrong position, you can gently lift and tear off the corner of the wall sticker with a small blade, and then paste it again. This product can be reused under normal circumstances, as long as it is not torn; 5. The typesetting size of DIY series products is tight, you can play an infinite creative role and freely combine the shape and position. You can first cut the pattern with scissors. Be careful not to damage the pattern when cutting.