Motorcycle Head Stickers Laser Colorful Engraving Stickers Totem Stickers Reflective Warning Stickers Night Safety Anti-Collision Stickers Waterproof Sunscreen Decals Body Decoration Stickers Block Scratch Stickers Creative DIY Stickers

【Product size】: as shown in the figure (the size may have an error of 0.1-1cm)

【Product function】: reflective material, waterproof, sun protection, high temperature resistance

【Product material】: PVC/polyvinyl chloride

【Reusability】: one-time use

【Product shape】: Irregular

【Product packaging】: Bubble Bag

【Product range】: motorcycle helmets, motorcycle and car modifications, luggage, notebooks, etc.

About installation:

Application of the sticker is very easy, taking only minutes.

Your sticker has 3 parts: (backing, sticker, clear transfer film)

Installation method of small car stickers (dry sticking method):

1. clean the sticking position and keep it dry;

2. remove the backing paper on the back;

(With the back side up, slowly peel off the backing paper. Note: it is very important that the back side is up.)

3. confirm the position and fix the small corner on one side

4. use bank paper or a scraper to scrape left or right to level the bubbles;

5. remove the transfer film;

6. done. Do not wash your car within 48 hours.

1. when tearing off the backing paper, the backing paper should be facing up and the transfer film should be facing down. There may be scattered parts stickers on the backing paper, which can be pressed onto the transfer film with your fingers;

2. after the backing paper has been torn off, avoid sticking the stickers together;

3. Please do not wash the car within 72 hours after it is pasted, because the sticker has not been completely pasted within this time, and the high-pressure water column of the car wash will cause it to fall off;

4. if you lack installation experience, it is recommended to use the wet paste method to install more securely!