Search
S$25.64
S$36.63Save up to 30%
SL200 Laminator Machine Hot and Cold Laminating Machine Two Rollers A4 Size Laminator for Photo Picture Credit Card Home Office
Sold by GZQIANJI SHOP
Select options
Select
Shipping
From S$1.49
Est. delivery by Jun 7 - Jun 10
GZQIANJI SHOP
34 items
Product description
SL200 Laminator Machine Hot and Cold Laminating Machine Two Rollers A4 Size Laminator for Photo Picture Credit Card Home Office
Features:
SL200 is a personal laminator designed for hot and cold lamination,fit for school and office supplies.
Entry width is 230mm, suitable pouch size is from credit card size (54*86mm) to A4 size, minimum laminating thickness is 160 (2*80) microns and the maximum thickness is 250 (2*125) microns.
Controlled by a rocker switch, easy to operate, adjust to switch cold laminating or hot laminating mode.
For HOT laminating, select HOT setting, HOT laminating can begin when the green Ready light comes on (allow approx 2 minutes heat up time).
For COLD laminating, select the COLD setting, the green Ready light comes on straight away and COLD laminating can begin. (please note you will need special cold laminating pouches)
Specifications:
•Model: SL200
•Color: white
•Rollers: 2 rollers (hot shoe)
•Entry Width: 230mm
•Min Pouch Thickness: 160 (2*80) micron
•Max Pouch Thickness: 250 (2*125) micron
•Min Pouch Size: credit card size (54*86mm)
•Max Pouch Size: A4
•Max Lamination Thickness: 0.5mm
•Laminating Speed: 25cm / min
•Warm Up: 2-4 minutes
•Power Consumption: 220W
•Item Size: 35.3 * 12.2 * 7.5cm / 13.9 * 4.8 * 2.95in
•Item Weight: 893g / 31.5oz
•Package Size: 39 * 15 * 9cm / 15.35 * 5.91 * 3.54in
•Package Weight: 1026g / 36.19oz
Package List:
•1 * laminator
•1 * user manual (English)
Frequently Asked Questions and Solutions
Q1:Foggy white spots on non-stick paper/photos
**Possible Cause 1: Insufficient Temperature Setting
##Solution: Set the temperature to the corresponding thickness required by the temperature of the more
**Possible Cause 2: Temperature setting is enough, but the preheating time is not reached, the temperature does not reach the set point before use.
##Solution: Please wait patiently for the laminator to reach the set temperature before operation.
Q2:Laminating wrinkles and unevenness
**Possible reason 1: the temperature is too high
##Solution 1:Reduce the temperature appropriately.
**Possible cause 2:The rubber roller of the gluing machine is not flat.
##Solution 2:Check if the roller is flat and intact.
**Possible Cause 3:The gluing material is not flat when it is placed.
##Solution 3:Place the rubberized material flat, and then put it into the sealing machine flat.
Q3:The four sides are not sticky/blistering on the empty side.
**Possible cause 1: insufficient pressure on the rubber roller of the gluing machine.
##Solution 1:Tighten the pressure of the rubber roller of the gluing machine.
**Possible cause 2: temperature is not enough
##Solution 2:Increase the temperature.
**Possible cause 3: impurities in the rubber coater roller
##Solution 3:Clean the impurities on the rollers.
Open TikTok