Door Gate Car DIY 433Mhz for DC 12V 1CH Relay Wireless Remote Control Transmitter Switch Receiver Module RF Transmitter Metal Plastic Aluminium TPU

Features:

brand new and high quality.

About Working mode:

- Momentary: Push the remote button, the relay connects, release the remote button, the relay dis-connects.

- Toggle: Push once the remote button, the relay connects, push twice the remote button, the relay dis-connects .

- Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

- for Time delay mode: Push the remote control button, the relay connects, from when release the remote button, after 5s or 10s or 15s, the relay disconnect automatically.

Clearing the code:

- Push the learning button on the receivers for 8 times, the codes will be cleaned.

- After clearing the code, all the remote control cannot work any more.

Learning the code: ( Momentary )

- Push the learning for key on the receiver once for time, it comes into momentary setting mode.

- Wait for a moment, the LED will be off , it comes into learning state.

- Push the remote button, LED indicator on the receiver board will flash then come off.

- After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the code: ( Toggle )

- Push the learning for key on the receiver twice for time, it comes into toggle setting mode.

- Wait for a moment , the LED will be off, it comes into learning state.

- Push the remote button, LED indicator on the receiver board will flash then come off.

- After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the code:( Latching )

Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first for time learnt is for "ON", the second for time learnt for "OFF".

For example: button A = ON , button B = OFF

- Push the learning for key on the receiver triple for time, it comes into latching mode .

- Wait for a moment, the LED indicator on the receiver board will flash then come off.

- Push the remote button A.

LED flash for 5 times.

- Push the remote button B.

Led flash for 5 times.

- After 3 seconds, the LED indicator will be on again, learning successfully.

A = ON, B = OFF.

Learning the code: ( for Time delay mode )

- Push the learning for key on the receiver forth for time, the for time dealy for 5 seconds.

- Push the learning for key on the receiver fifth for time, the for time delay for 10 seconds.

- Push the learning for key on the receiver sixth for time, the for time delay for 15 seconds.

The LED indicator will be off.

- Push the remote button , LED flashes and off .

- After 3 seconds, the LED indicator will be on again, learning successfully.

NOTE: The system can store for 50 pcs of remotes, if the remote get more than 50pcs, the initial remote control will be lost.

Specifications:

Model: KR2201-4

Material: Plastic + Metal

Color: Black

Dimension of PCB: (L×W×H) 35×30×18mm/1.38×1.18×0.71in (Approx.)

Input Power: DC10V-14V

Standby Current: 97dbm

Transmitting distance: >100m (open space)

Decoding mode: MCU software decoding

Remote storage: 25pcs

Support remote type: Learning code, Fixed code(Rolling code can be design)

Working mode: Momentary, Toggle, Latching for Time delay (5s ,10s ,15s )

Wiring type: fixed terminal

Output Terminal: NO , NC , COM

Wiring diagram:

+V : 12V + input ;

- V: 12V - input ;

NO: Output, normal open;

COM: Output, common ;

NC: Output, normal close

Quantity: 1 Set (other accessories demo in the picture is not included)

Note:

1.Transition: 1cm=10mm=0.39inch

2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.

3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:

1 X Remote Switch Receiver Module (KR2201-4) (include for Shell) (No retail package)