Lingke LK-188 Shaver Electric Shaver Electric Shaver Travel Portable Rechargeable Men Shaver

Product Introduction

Product Name: Portable Shaver Product Weight: 200G

Product Model: LK-188 Product Size: 12.5*3.5 * 8.8cm (Including Box)

Power: 2W Packing Number: 150PCs

Applicable Voltage: 220V Packing Specification: 42*25.5 * 51cm

Product Configuration

Style 1: Black Suit (Including: Host Body + Brush + Manual Certificate, Only Pogonotomy Function.)

1. Be Sure to Use AC 220V/50Hz to Charge

2. Turn off the Switch, Push out the Charging Pin and Insert It into the Power Socket. 3. When the Switch Is Not Closed, It Cannot Be Charged. 4. When Charging, the Charging Indicator Light Is on. 5. the Standard Charging Time Is 8 Hours. [Precautions]

Do Not Charge in Areas Where the Rated Voltage Exceeds 240V, Otherwise Failure Will Occur.

Do Not Charge Continuously for More than 24 Hours, Or Charge When the Temperature Is Lower than 0℃ Or Higher than 40℃, Otherwise the Battery Life Will Be Shortened. Do Not Use Water to Washer Body, and Do Not Bring It into the Bathroom for Use, Otherwise It Will Break down. When the Body Is Dirty, You Can Use a Soft Cloth to Apply Neutral Lotion for a Test. Do Not Use Alcohol Or Gasoline. When Abnormal Conditions (Such as Smell, Temperature, and Sound) Occur during Charging Or Using the Product, the Power Supply Should Be Cut off Immediately and the Use Should Be Stopped.

Proper Use and Maintenance of Electric Shaver Can Not Only Achieve Satisfactory Pogonotomy Effect, but Also Prolong the Service Life of Electric Shaver. Attention Should Be Paid to the following Aspects When Using It.

1. When Installing the Power Supply, Pay Attention to the Polarity of the Dry Battery Or Charger to Prevent the Motor from Turning Upside down, Thus Damaging the Fixed Blade and Moving Blade. 2. at Pogonotomy, the Fixed Blade Should Be Pressed Tightly against the Face Slowly, and the Beard Should Move against the Growth Direction, So That the Beard Can Enter the Mesh Smoothly. If You Move along the Beard, It Will Overwhelm the Beard, Which Is Not Conducive to the Beard Entering the Mesh. 3. Electric Shaver Is Not Suitable for Shaving Long Beard, So It Is Better to Shave Every 4 Days Or So. If the Beard Is Long, the Beard Should Be Cut Short with a Clipper Or Small Scissors First, and Then Shaved off with an Electric Shaver. If There Is No Clipper Or Small Scissors, Multiple Shaving Methods Should Be Adopted. First, the Fixed Blade (Mesh Cover) and the Beard Touch the Skin Vertically, and the Beard Should Be Shaved Shorter, then Proceed According to the Method of 2.4. When Using an Electric Shaver with a Clipper, the Cutting Edge of the Clipper Should Be Moved at a Vertical Angle with the Face to Clean the Beard. 5. Once the Rolling Stop Occurs at Pogonotomy, Turn off the Power Supply and Restart It. after the Motor Rotates Normally, Continue to Pogonotomy. 6. the Fixed Blade of the Electric Shaver Is Very Thin and Cannot Be Forced to Deform Or Damage It. 7. for Dry Cell Battery Electric Shaver, Take out the Battery after Using It Or Lay up for a Long Time to Avoid Unnecessary Corrosion and Damage Caused by Moisture and Liquid Leakage. AC Type Electric Shaver, after Use, Should Cut off the Power Supply, Pull out the Plug, to Ensure That. Rechargeable Electric Shaver Cannot Discharge Too Much Power. If the Battery Is Insufficient, It Should Be Charged before Use. If It Is Lay up for a Long Time, It Should Also Be Charged Regularly (about Three One Months). 8. Add a Small Amount of Lubricating Oil to the Bearing Part Regularly to Reduce Wear. Non-Wet Electric Shaver, Do Not Wash with Volatile Chemicals Such as Water Or Alcohol. If the Blade of Non-Stainless Steel Material Is Not Used for a Long Time, a Thin Layer of Oil Should Be Applied to the Blade to Prevent Rust from Damaging the Blade. 9. after Using the Shaver Every Time, Use a Small Brush to Clean up the Dirt Such as Fringe, and Do Not Let the Dirt Pile up. Otherwise, the Motor Will Be Stuck Or the Transmission Will Be Blocked. At the Same Time, Shavings and Greasy Skin Will Affect the Sharpness of the Blade Once It Is Solidified on the Blade.

[Precautions for Receipt of Goods]

1. in Order to Protect Your Interests, Please Check the Transportation Situation Face to Face with the Courier When You Sign for It. If the Product Is Damaged during Transportation, Please Reject It Directly. We Will Be Responsible for Full Compensation Or Reissue for You, we Will Not Accept Any Problems Such as Damage, Defects and Missing Goods after Signing.

2. Please Keep the Contact Information Such as Mobile Phone Unblocked When Receiving Goods. If the Goods Are Returned Due to Personal Reasons (Mobile Phone Shutdown, No Answer, Wrong Address, Wrong Phone Number and Unreasonable Requirements for Express Delivery), we Will Not Bear Any Responsibility. If the Product and Color Box Are Damaged Due to This, We Will Charge Corresponding Fees as Compensation.

Notes on Receipt of Goods

[after-Sales Problem]

1. Welcome to Our Store. Our Store Sells Factory Direct Sales Shavers Wholesale and Sells High Performance Ratio. Please Rest Assured to Buy Counterfeit Shavers.