Universal Car Dent Repair Puller Remove Dents Sheet Metal Plastic Suction Cup For Pulling Repair Kit Car Repair Tools

Features:

100% Brand new and high quality.

It is made of aluminium alloy for strong strength and long durability.

Used as a adapter for slide hammer or pulling tap for easy catching and pulling.

A necessary component for dent repair, direct replacement for the broken one.

Easy installation, the thread size is M10 for better application.

This product does not contain Glue.

Specification:

Material: Aluminum Alloy

Color: As the picture show

Type: M10

Size: As the picture show

How to use this paintless dent repair kits :

1.Clean the dent with a clean wet cloth; 

2.Mount the glue stick(Not Included)  into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 

3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the 

drawing gasket is, the larger the drawing force is); 

4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);

5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 

6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 

7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 

8. Clean the repaired place with a clean wet cloth.

Package Included:

1pcs x Slide Hammer